YS/T 575.22-2007 铝土矿石化学分析方法 第22部分 湿存水含量的测定 重量法

作者:标准资料网 时间:2024-05-04 13:14:55   浏览:8541   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:铝土矿石化学分析方法 第22部分 湿存水含量的测定 重量法
英文名称:Methods for chemical analysis of bauxite Part 22:Determination of hydroscopic moisture on gravimetric method
中标分类: 建材 >> 炭素材料 >> 炭素材料
ICS分类: 化工技术 >> 化工产品 >> 铝生产用材料
替代情况:代替YS/T 575.22-2006
发布部门:国家发展和改革委员会
发布日期:2007-11-14
实施日期:2008-05-01
首发日期:
作废日期:
提出单位:全国有色金属标准化技术委员会
归口单位:全国有色金属标准化技术委员会
起草单位:中国铝业郑州研究院
起草人:张树朝、郭永恒
出版社:中国标准出版社
出版日期:2008-05-01
页数:平装16开/页数:5/字数:6千字
适用范围

本标准规定了铝土矿石分析样品中湿存水含量的测定方法。
本标准适用于铝土矿石分析样品中湿存水含量的测定。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
YS/T575.20 铝土矿石化学分析方法 预先干燥试样的制备

所属分类: 建材 炭素材料 炭素材料 化工技术 化工产品 铝生产用材料
下载地址: 点击此处下载
基本信息
标准名称:银氧化镉电触头材料化学分析方法
中标分类: 电工 >> 电工材料和通用零件 >> 电工合金零件
替代情况:替代JB 4107.3-85;被JB/T 7776.1-2008代替
发布部门:中华人民共和国机械工业部
发布日期:1995-10-09
实施日期:1996-01-01
首发日期:1900-01-01
作废日期:2008-09-01
提出单位:机械工业部桂林电器科学研究所
归口单位:机械工业部桂林电器科学研究所
起草单位:国营六一五厂
出版社:机械工业出版社
出版日期:1996-01-01
页数:3 页
适用范围

本标准规定了银氧化镉电触头材料中镉量的测定方法。
本标准适用于银氧化镉电触头材料中镉量的测定方法。测定范围:5.00%~25.00%。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电工 电工材料和通用零件 电工合金零件
Product Code:SAE J122
Title:Surface Discontinuities on Nuts
Issuing Committee:Fasteners Committee
Scope:This SAE Recommended Practice defines, illustrates, and specifies allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts, in sizes 6.3 to 25 mm and inch-series nuts in sizes 1/4 to 1 in, inclusive, which are primarily intended for use in automotive assemblies.The basic recommended practice does not include inspection sampling requirements. It is intended that the purchaser shall specify in the original inquiry and purchase order the inspection sampling requirements which the producer must satisfy to demonstrate the acceptability of nuts with respect to surface discontinuities. Appendix A outlines inspection sampling plans applicable when such requirements are not specified by the purchaser in the original inquiry and purchase order.